MiniMoog Voyager – Live Bach Performance!
It’s not all that often I run across a live synthesizer performance that warrants note. Here’s one that really deserves attention: Bach prelude in c minor played by Kjell Gierstae on his MiniMoog Yoyager.
From WikiPedia:
The Minimoog Voyager or Voyager is a monophonic analog synthesizer, designed by Robert Moog and released in 2002 by Moog Music. The Voyager was modeled after the classic Minimoog synthesizer that was popular in the 1970s.Like the original Minimoog, the Voyager has six sound sources. Five of these (three voltage-controlled oscillators with switchable waveforms, a noise generator, and an external line input) pass to a mixer with independent level controls. The mixed output of the sources is then passed through the voltage-controlled filter and a voltage-controlled amplifier, each of which has its own ADSR envelope generator. The voltage-controlled filter can itself be made to oscillate, thus comprising the Voyager’s sixth sound source.
In addition to similar features of the original Minimoog, the Voyager was designed to have a memory bank capable of storing 128 presets, a touch pad modulation control, dedicated LFO, two modulation buses (one controllable via the modulation wheel and the other with a foot pedal), two ADSR envelopes for filter and amplifier control, a pressure-sensitive keyboard, 14 voltage-control inputs, and MIDI input/output.
Unlike the original Minimoog, the Voyager’s modulation buses can be set to affect almost any parameter of the sound, not just the filters. Although the synthesizer features MIDI control and advanced patch storage, all audio paths in the Voyager are analog with the sound originating from any of three oscillators designed for high tuning stability, as the original Minimoog oscillators tended to slightly shift out of tune while playing.
With the Voyager, certain parameters that were fixed on the original Minimoog can be programmed to suit the player’s preference. This includes selection between low-note, high-note or last-note priority. Also, the envelope generators can be set to retrigger with each pressed note or they can be set not to retrigger until all notes are lifted and the next note is played.
